Xorcom UC912G User Manual Download Page 134

Page: 134 / 165

UC912G IP Phone

Page 134 of 165

DND

If a key is configured as DND key, it allows you to activate the DND function by pressing it. When
DND is activated, the phone will reject all incoming calls automatically. Press DND again to
deactivate DND mode.

Configuring DND using the phone interface

Press Menu →Features →Function Keys →Line Keys as Function Keys → Line Key2 (for
example)

Press Left arrow or Right arrow key to select the DND in the Type field.

Press OK or Save soft key to save the configuration

Configuring DND using the web interface

Click Function keys →Line Key.

Select a key and select DND in the Type.

Click the SaveSet button to save the configuration.

Enabling DND feature

Press the DND soft key when the phone is idle status: DND icon will be shown on the LCD display.

Disabling DND feature

Press the DND soft key again: no DND icon is displayed on the LCD.

Summary of Contents for UC912G


























































































































































Search results

Summary of Contents for UC912G

Reviews:

Brands by name

Popular brands

Xorcom UC912G, User Manual

Search results

Summary of Contents for UC912G

Reviews:

Brands by name

Popular brands