Wireless LAN Array
Installing the Xirrus Array
55
Figure 36. WMI: Express Setup Page (Part 2)
Procedure for Performing an Express Setup
1.
Host Name
: Specify a unique
host name
for this Array. The host name is
used to identify the Array on the network. Use a name that will be
meaningful within your network environment, up to 64 alphanumeric
characters.
2.
Location Information
: Enter a brief but meaningful description that
accurately defines the physical location of the Array. In an environment
where multiple units are installed, clear definitions for their locations are
important if you want to identify a specific unit.
3.
Admin Contact
: Enter the name and contact information of the person
who is responsible for administering the Array at the designated location.
4.
Admin Email
: Enter the email address of the admin contact you entered
in Step 3.
5.
Admin Phone
: Enter the telephone number of the admin contact you
entered in Step 3.
6.
Enable/Configure All IAPs
: Click on the
Execute
button to enable and
auto configure all IAPs (a message displays the countdown time—in
seconds—to complete the auto-configuration task).
... continued
