Wireless LAN Array
52
Installing the Xirrus Array
Once the unit is fully booted the default IAP LED display will be as follows:
z
IAP radio LEDs that are enabled will show a steady orange for 802.11a
radios, or green for 802.11b/g radios.
z
Once a client associates with an individual IAP, that LED will show a
slow flash (heartbeat) pattern.
z
When data is transmitted or received by an IAP, that IAP’s LED will flash.
The rate of flashing changes with the number of packets sent or received
per second—the LED will flash more quickly with a greater number of
packets per second and more slowly with lower numbers of packets per
second.
These settings may be altered or disabled entirely for diagnostic purposes or for
personal preference. Changes are made via the Array’s Command Line Interface
or the Web Management Interface—refer to
“IAP LED Settings” on page 103
.
Figure 33. WMI: IAP LED Settings Page
