Wireless LAN Array
78
Configuring the Xirrus Array
16.
Use NTP (IP Address)
: Check this box if you want to use an
NTP
(Network Time Protocol) server to synchronize the Array’s clock. This
ensures that syslog time-stamping is maintained across all units. Without
an NTP server assigned (no universal clock), each Array will use its own
internal clock and stamp times accordingly, which may result in
discrepancies. When this box is checked, the NTP and NTP 2 IP address
fields become active. If you don’t want to use an NTP server, leave this
box unchecked (default), otherwise enter the IP address or DNS name of
the NTP server.
Figure 54. Enabling the NTP Feature
a.
NTP 2 (IP Address)
: If you enabled the NTP option and the site is
using a secondary NTP server, enter the IP address or DNS name of
the secondary NTP server.
17.
Click on the
Apply
button to apply the new settings to this session
18.
Click on the
Save
button to save your changes (otherwise your new
settings will not take effect).
This ends the Express Setup procedure.
NTP enabled
