Wireless LAN Array
Configuring the Xirrus Array
103
IAP LED Settings
This page allows you to set up the Array’s IAP LEDs, including the assignment of
behavior preferences.
Figure 71. WMI: IAP LED Settings Page
Procedure for Configuring the IAP LEDs
1.
LED State
: This option determines which event triggers the LEDs, either
when a radio is enabled or when a radio first associates with the network.
Choose
On Radio Enabled
or
On First Association
, as desired.
2.
LED Blink Behavior
: This option allows you to select when the IAP LEDs
blink, based on the activities you check here. From the choices available,
select one or more activities to trigger when the LEDs blink.
3.
Click on the
Apply
button to apply the new settings to this session, then
click on the
Save
button to save your changes.
