Wireless LAN Array
86
Configuring the Xirrus Array
Procedure for Configuring the DHCP Server
1.
Enable DHCP Server
: Choose
Yes
to enable DHCP services, or choose
No
to disable DHCP services.
2.
Default Lease (seconds)
: This field defines the default
DHCP lease
time
(in seconds). The factory default is 300 seconds, but you can change the
default at any time.
3.
Maximum Lease (seconds)
: Enter a value (in seconds) to define the
maximum allowable DHCP lease time. The default is 300 seconds.
4.
Starting IP Range
: Enter an IP address to define the start of the IP range
that will be used by the DHCP server. The default is 192.168.1.100.
5.
End IP Range
: Enter an IP address to define the end of the IP range that
will be used by the DHCP server. The DHCP server will only use IP
addresses that fall between the start and end range that you define on this
page. The default is 192.168.1.200.
6.
Click on the
Apply
button to apply the new settings to this session.
7.
Click on the
Save
button to save your changes (otherwise your new
settings will not take effect).
