Wireless LAN Array
Configuring the Xirrus Array
83
e.
Configuration Server Protocol
: Choose
DHCP
to instruct the Array
to use
DHCP
when assigning IP addresses to the Array, or choose
Static IP
if you intend to enter IP addresses manually.
z
IP Address
: If you selected the Static IP option, enter a valid
IP address for the Array. To use any of the remote
connections (Web,
SNMP
, or SSH), a valid IP address must be
established.
z
IP Subnet Mask
: If you selected the Static IP option, enter a
valid IP address for the
subnet mask
(the default for Class C
is 255.255.255.0). The subnet mask defines the number of IP
addresses that are available on the routed subnet where the
Array is located.
z
Default Gateway
: If you selected the Static IP option, enter a
valid IP address for the
default gateway
. This is the IP
address of the router that the Array uses to transmit data to
other networks.
2.
Click on the
Apply
button to apply the new settings to this session.
3.
Click on the
Save
button to save your changes (otherwise your new
settings will not take effect).
