Wireless LAN Array
68
The Web Management Interface
Status Bar
Below the configuration frames you will find a status bar containing information
about this Array, including:
z
Location—displays the location information assigned to the unit.
z
Host name—the
host name
assigned to this unit.
z
Network interface IP address—the IP address of the network interface
that is currently being used.
Also included in the status bar is a
button and a
Help
button. Click on the
Print button to send a print file of the active page to your local printer, or click on
the Help button to go to the Array’s online help system.
Figure 45. WMI: Status Bar
Applying Configuration Changes
When you have defined all your settings on any WMI configuration page, you
must click on the
Apply
button for the changes to take effect in the current
session. Click on the
Save
button to write your changes (for future sessions).
Character Restrictions
When inputting strings in the WMI (for example, assigning SSIDs, host name,
password, etc.), use only common alphanumeric characters. Do not use any of the
following characters:
&
<
>
'
“
/
\
Status information
Print button
Help button
