Wireless LAN Array
30
Installing the Xirrus Array
Fine Tuning Cell Sizes
Adjusting the
transmit power
allows you to fine tune cell sizes. There are three
settings—Large, Medium, or Small (the default is Large). If you are installing
many units in close proximity to each other, reduce the transmit power to avoid
excessive interference with other Arrays or installed APs. See also,
“IAP Settings”
on page 90
.
Figure 15. Transmit Power
Roaming Considerations
Cells should overlap approximately 10 - 15% to accommodate client roaming.
Figure 16. Overlapping Cells
Large
Medium
Small
R O A M I N G
10 - 15% overlap
