Xinje DS5C Series, Manual, Page: 111 / 121

103
lose and servo
will alarm, set
F0-00=1 to clear
this alarm
3 E-223
Absolute
encoder data
visit alarm
Encoder problem, or
power supply is not
stable
Unplugging the
encoder cable
without battery
will alarm
4 E-224
Absolute
encoder
overspeed
Large change of
encoder data
Unplugging the
encoder cable
without battery
will alarm
22 8 E-228
Absolute
encoder
counting value
overflow
Motor run at same
direction for long time ,
the encoder value too
large
1. set F1-06=1
clear the encoder
rotate numbers
2. set P0-79=1
can shield this
alarm
26
0 E-260
Over range
alarm
detected the over range
signal and the over
range mode is alarm
If it no need to
alarm after over
range, user can
change the over
range signal
mode
1 E-261
Over range
signal
connection error
1. motor run forward
and encounter the
reverse over range
signal
2. motor run reverse
Check the over
range connection
and over range
terminal
distribution