Xilinx Zynq UltraScale+ ZCU104, User Manual

Page: 68 / 92

ZCU104 Board User Guide 68
UG1267 (v1.1) October 9, 2018 www.xilinx.com
Chapter 3: Board Component Descriptions
Power and Status LEDs
[ Figure 2-1 , area of callout 34]
Table 3-25 defines the power and status LEDs. For user controlled LEDs, see User I/O,
page 64 .
Table 3-25: Power and Status LEDs
Ref. Des. Net Name LED Color Description
DS1 PS_INIT_B Green/Red Green: FPGA initialization was successful
Red: FPGA initialization is in progress
DS2 VCC12_SW Green 12 VDC power on
DS3 VCC1V8_PGOOD Green VCC1V8 1.8 VDC power on
DS4 MGTAVCC_PGOOD Green MGTAVCC 0.9 VDC power on
DS5 VCCINT_PGOOD Green VCCINT 0.85 VDC power on
DS6 VCC1V2_PGOOD Green VCC1V2 1.2 VDC power on
DS7 VCC3V3_PGOOD Green VCC3V3 3.3 VDC power on
DS8 VADJ_FMC_PGOOD Green VADJ_FMC 1.8 VDC (nominal) power on
DS9 MGT1V8_PGOOD Green MGTVCCAUX, PS_MGTRAVCC 1.81 VDC power on
DS10 MGT1V2_PGOOD Green MGTAVTT. VCC_PSPLL 1.2 VDC power on
DS21 PL_DDR4_VTERM_0V60_PGOOD Green PL_DDR4_VTERM 0.6 VDC power on
DS24 UTIL_2V5 Green UTIL_2V5 2.5 VDC power on
DS25 UTIL_3V3_PGOOD Green UTIL_3V3 3.3 VDC power on
DS26 MGTRAVCC_PGOOD Green MGTRAVCC 0.85 VDC power on
DS27 ENET_LED_1 Green EHPY U98 1000BASE-T link speed
DS32 PS_DONE Green MPSoC U1 bit file download is complete
DS33 PS_ERR_STATUS
(1)
Green
PS error status indicates a secure lockdown state.
Alternatively, it can be used by the PMU firmware
to indicate system status.
DS35 PS_ERR_OUT
(1)
Red
PS error out is asserted for accidental loss of power,
an error in the PMU that holds the CSU in reset, or
an exception in the PMU.
DS36 POR_RST_B Red
POR U22 asserts RST_B low when any of the
monitored voltages (IN_) falls below its respective
threshold, any EN_ goes low, or MR is asserted.
DS49 UTIL_1V13_PG Green UTIL_1V13 1.13 VDC power on
DS51 USB3 MIC2544 U121 FLG Green PS USB 3.0 ULPI VBUS power error
DS53 UTIL_5V0_PGOOD Green UTIL_5V0 5 VDC power on
Send Feedback