![background image](http://html.mh-extra.com/html/texas-instruments/bq51010bevm-764/bq51010bevm-764_user-manual_1096120001.webp)
User's Guide
SLUUAE3A – August 2013 – Revised December 2013
bq51010BEVM-764 Evaluation Module (WCSP Package)
The bq51010BEVM-764 (EVM) wireless power receiver evaluation kit from TI is a high-performance, easy-
to-use development kit for the design of wireless power solutions. The EVM helps designers to evaluate
the operation and performance of the bq51010B, 7-V power supply for wireless power transfer. The
bq51010B devices provide AC/DC power conversion and regulation while integrating the digital control
required to comply with the Qi-communication protocol. The kit speeds up the development of end-use
applications.
Contents
1
Considerations with this EVM
.............................................................................................
2
Modifications
.................................................................................................................
3
Recommended Operation Condition
.....................................................................................
4
Equipment and EVM setup
................................................................................................
4.1
Schematic
...........................................................................................................
4.2
Connector and Test Point Descriptions
.........................................................................
4.3
Jumpers and Switches
............................................................................................
4.4
Test Point Descriptions
............................................................................................
4.5
Pin Description of the IC
..........................................................................................
5
Test Procedure
..............................................................................................................
5.1
Definition
............................................................................................................
5.2
Recommended Test Equipment
.................................................................................
5.3
Equipment Setup
...................................................................................................
5.4
Procedure
...........................................................................................................
6
Test Results
................................................................................................................
6.1
Load Step
..........................................................................................................
6.2
Load Dump
........................................................................................................
6.3
Start-Up
............................................................................................................
6.4
Efficiency
..........................................................................................................
6.5
Thermal Performance
............................................................................................
7
Layout and Bill of Material
................................................................................................
7.1
Layout
..............................................................................................................
7.2
Bill of Materials (BOM)
...........................................................................................
List of Figures
1
HPA764 Schematic
.........................................................................................................
2
Test Set Up
..................................................................................................................
3
Load Step, 0 mA to 600 mA
.............................................................................................
4
Load Dump, 500 mA to 0 mA
...........................................................................................
5
Start-Up
....................................................................................................................
6
Efficiency for the bq51010B versus I
OUT
...............................................................................
7
Thermal Image
.............................................................................................................
8
bq51010BEVM-764 Layout Example
..................................................................................
9
bq51010BEVM-764 Top Assembly
.....................................................................................
10
bq51010BEVM-764 Top Layer
..........................................................................................
11
bq51010BEVM-764 Bottom Copper Layer
............................................................................
bqTESLA is a trademark of Texas Instruments, Inc..
1
SLUUAE3A – August 2013 – Revised December 2013
bq51010BEVM-764 Evaluation Module (WCSP Package)
Copyright © 2013, Texas Instruments Incorporated