Xilinx Zynq UltraScale+ ZCU104, User Manual

Page: 11 / 92

ZCU104 Board User Guide 11
UG1267 (v1.1) October 9, 2018 www.xilinx.com
Chapter 2
Board Setup and Configuration
Board Component Location
Figure 2-1 shows the ZCU104 board component locations. Each numbered component
shown in the figure is keyed to Table 2-1 . Table 2-1 identifies the components, references
the respective schematic (0381794) page numbers, and links to a detailed functional
description of the components and board features in Chapter 3 .
IMPORTANT:
Figure 2-1
is for visual reference only and might not reflect the current revision of the
board.
IMPORTANT:
There could be multiple revisions of this board. The specific details concerning the
differences between revisions are not captured in this document. This document is not intended to be
a reference design guide and the information herein should not be used as such. Always refer to the
schematic, layout, and XDC files of the specific ZCU104 version of interest for such details.
CAUTION!
The ZCU104 board can be damaged by electrostatic discharge (ESD). Follow standard ESD
prevention measures when handling the board.
Electrostatic Discharge Caution
CAUTION!
ESD can damage electronic components when they are improperly handled, and can result
in total or intermittent failures. Always follow ESD-prevention procedures when removing and
replacing components.
To prevent ESD damage:
• Use an ESD wrist or ankle strap and ensure that it makes skin contact. Connect the
equipment end of the strap to an unpainted metal surface on the chassis.
• Avoid touching the adapter against your clothing. The wrist strap protects components
from ESD on the body only.
Send Feedback