manualshive.com logo in svg

Xilinx T1, User Manual, Page: 4 / 54

Share
Download
Xilinx T1 User Manual Download Page 4

Chapter 1

Introduction

The Xilinx

®

 T1 Telco accelerator card is a PCI Express

®

 (PCIe) Gen3 x16 compliant card featuring

the 16 nm Zynq

®

 Ult™ MPSoC and Zynq Ult RFSoC devices. The T1 form factor

is full height, half length (FHHL) and single slot, with a PCIe Gen 3 x16 interface that is x8x8
bifurcated providing x8 links from the host to each MPSoC and RFSoC device. Target applications
for the T1 card include:

• O-RAN fronthaul termination

• 4G LTE and 5G NR high-PHY lookaside acceleration (supporting 3GPP split option 7-2x)

• 5G layer 1 (L1) high-PHY lookaside acceleration

• Optional use of fronthaul ports for a midhaul (F1) interface between distributed and

centralized units (DU and CU)

• 4G LTE and 5G NR inline acceleration of L1 functions (supporting 3GPP split option 7-2x) for

up to 4TRX

Figure 1: T1 Telco Accelerator Card

Chapter 1: Introduction

UG1495 (v1.0) December 17, 2021

 

www.xilinx.com

T1 Telco Accelerator Card User Guide

 4

Send Feedback

Summary of Contents for T1























































Reviews:

No comments