Field Wiring Connections
Make sure electrical power to the heater is discon-
nected to avoid potential serious injury or damage to
components.
CAUTION:
Wiring errors can cause improper and
dangerous operation. See the wiring diagram in this
manual. Verify proper operation after servicing.
DANGER: SHOCK HAZARD
*
* CAN BE MODIFIED TO ACCEPT 4-20mA
CONSULT VERSA IC MANUAL
ALARM
CONTROL/SENSOR
WIRING
HIGH VOLTAGE POWER
AND PUMP WIRING
LOCATION
RATING PLATE
SUGGESTED ROUTING OF
SENSOR & CONTROL
WIRING
Fig. 14: Rear Wiring Location
Fig. 16: XFyre Single Heater Control
PLATFORM
IGNITION MODULE
(PIM)
VERSA
CONTROL
Fig. 15: Front Wiring Locations
Wiring the Thermostat
Connect the Enable/Disable terminals to the PIM (shown in Fig. 16). Alternately, any dry contact closure (includ-
ing a remote thermostat) across these terminals will enable the XFyre unit to run. Caution should be used to
ensure neither of the terminals becomes connected to ground.
21
Summary of Contents for 300A
Page 44: ...WIRING DIAGRAM 44...
