Xerox XC23 User Manual Download Page 85

Page: 85 / 123

Copier care

XC23/XC33/XC33D User Guide 81

Cleaning the ADF/DADF belt

Keeping the ADF/DADF belt clean helps prevent ADF/DADF
misfeeds.

XEROX

suggests that you clean the belt as needed.

Note:

This procedure is for copiers which are equipped with the

ADF/DADF.

Caution:

Do not pour or spray water directly on the belt.

Procedure:

1. Switch the copier off.

2. Slightly dampen a soft lint-free cloth or paper towel with

water.

3. Raise the ADF/DADF.

4. Cover the document glass to prevent water from spilling

on the glass.

5. Wipe the exposed surface of the belt until it is clean.

6. Pull the belt from the right to left to expose dirty sections

of the belt.

7. Repeat the cleaning procedure until the entire belt is

clean and dry.

8. Close the ADF/DADF.

9. Switch the copier on.

Summary of Contents for XC23




























































































































Search results

Summary of Contents for XC23

Reviews:

Related manuals for XC23

Brands by name

Popular brands

Xerox XC23, User Manual

Search results

Summary of Contents for XC23

Reviews:

Related manuals for XC23

Brands by name

Popular brands