Xerox XC23 User Manual Download Page 33

Page: 33 / 123

Loading the paper trays

XC23/XC33/XC33D User Guide

Switching the paper trays

Change the paper size of a tray by ordering an additional paper
tray that is set to another size and placing that tray into your
desired tray location.

To order another paper size tray call In the United States and
Canada: 1-800-TEAM-XRX (1-800-832-6979).

Use the following procedure in order to switch a tray.

Procedure:

Note:

Paper trays 1, 2, and 3 are interchangeable.

1. Slide out the tray to be changed until it stops.

2. Lift the front side of the tray and remove it.

3. Store the tray in a convenient location.

4. While holding the front side of the desired tray, insert the

tray under both guides of the empty tray slot.

5. Close the tray.

Summary of Contents for XC23




























































































































Search results

Summary of Contents for XC23

Reviews:

Related manuals for XC23

Brands by name

Popular brands

Xerox XC23, User Manual

Search results

Summary of Contents for XC23

Reviews:

Related manuals for XC23

Brands by name

Popular brands