![background image](http://html2.mh-extra.com/html/xerox/workcentre-7120/workcentre-7120_system-administrator-manual_3331478042.webp)
Network Configuration
WorkCentre 7120/7125 Multifunction Printer
System Administrator Guide
42
IPP
Internet Printing Protocol (IPP) is used for remote printing and managing print jobs.
Enabling IPP
1.
In CentreWare IS, click
Properties
>
Connectivity
>
Port Settings.
2.
Next to
IPP
, select
Enabled
.
3.
Click
Apply
.
Configuring IPP
1.
In CentreWare IS, click
Properties
>
Connectivity
>
Protocols
>
IPP
.
2.
Next to
Add Port Number
, type the port number that you want the printer to use.
3.
Next to
Administrator Mode
select
Enabled
to allow only one specific user to control or delete
any print job.
4.
Type the
Connection Time-Out
. Default is 60 seconds.
5.
Click
Apply
.
Summary of Contents for WORKCENTRE 7120
