![background image](http://html2.mh-extra.com/html/xerox/workcentre-7120/workcentre-7120_system-administrator-manual_3331478022.webp)
Network Configuration
WorkCentre 7120/7125 Multifunction Printer
System Administrator Guide
22
TCP/IP
Transmission Control Protocol (TCP) and Internet Protocol (IP) are a two protocols within the Internet
Protocol Suite. IP manages the transmission of messages from computer to computer while TCP
manages the actual end-to-end connections.
Note:
You can configure IPv4 settings at the printer control panel or through CentreWare IS. You
can only configure IPv6 through CentreWare IS.
Enabling TCP/IP
Note:
By default, TCP/IP is enabled. If you disable TCP/IP, you must enable it at the printer control
panel before you can access CentreWare IS.
1.
At the printer control panel, press the
Machine Status
button, then touch the
Tools
tab.
2.
Touch
Connectivity and Network Setup
>
Protocol Settings
.
3.
Touch
TCP/IP - IP Mode
, then touch
Change Settings
.
4.
Touch
IPv4 Mode
,
IPv6
, or
Dual Stack
to enable both IPv4 and IPv6.
5.
Touch
Save
.
Configuring TCP/IP Settings at the Control Panel
Manually Configuring an IPv4 Network Address
1.
At the printer control panel, press the
Machine Status
button, then touch the
Tools
tab.
2.
Touch
Connectivity and Network Setup
>
Protocol Settings
.
3.
Touch
IPv4 - IP Address Resolution
, and touch
Change Settings
.
4.
Touch
Static
, then touch
Save
.
5.
Touch
IPv4 - IP Address
, and touch
Change Settings
.
6.
Type the static IP address using the touch-screen keypad, and touch
Save
.
7.
Touch
IPv4 - Subnet Mask
, and touch
Change Settings
.
8.
Type the subnet mask using the touch-screen keypad, and touch
Save
.
9.
Touch
IPv4 - Gateway Mask
, and touch
Change Settings
.
10. Type the gateway mask using the touch-screen keypad, and touch
Save
.
Manually Configuring an IPv6 Network Address
1.
At the printer control panel, press the
Machine Status
button, then touch the
Tools
tab.
2.
Touch
Connectivity and Network Setup
>
Protocol Settings
.
3.
Touch
IPv6 Address Manual Configuration
, then touch
Change Settings
.
4.
Touch
Enabled
, then touch
Save
.
5.
Touch
Manually Configured IPv6 Address
, then touch
Change Settings
.
6.
Type the static IP address using the touch-screen keypad, and touch
Save
.
7.
Touch
Manually Configured IPv6 Address Prefix
, and touch
Change Settings
.
Summary of Contents for WORKCENTRE 7120
