Xerox WorkCentre 6027 User Manual Download Page 191

Page: 191 / 226

Troubleshooting

Xerox

WorkCentre

6027 Multifunction Printer 191

User Guide

Solving Print-Quality Problems

When the print quality is poor, select the closest symptom from the following table and see the

corresponding solution to correct the problem. You can also print a Demo Page to more precisely

determine the print-quality problem. For details, see

Information Pages

on page 26.

If the print quality does not improve after carrying out the appropriate action, contact your Xerox

representative.

Notes:

•

To enhance print quality, toner cartridges for many models of equipment have been designed to

cease functioning at a predetermined point.

•

Grayscale images printed with the composite black setting increment the color pages counter,

because color consumables are used. Composite black is the default setting on most printers.

Symptom

Cause

Solution

Faded printouts with multiple

colors faded

The paper type is heavier or

thicker than the paper type

selection.

Adjust the paper type settings. For

details, see

Adjusting Paper Type

page 160.

The paper being used is outside

the recommended specification

range.

Replace the paper with a recommended

size and type, and confirm that your

control panel and print driver settings are

correct. For details, see

Supported Paper

on page 84.

The toner cartridges are not

Xerox

toner cartridges.

Replace the toner cartridges with

genuine Xerox

toner cartridges. It can

take several prints before full quality is

restored.

The bias transfer roller voltage is

insufficient for the paper type.

Increase the bias transfer voltage for the

selected paper type. For details, see

Adjusting the Bias Transfer Roller

page 161.

The fuser is not adjusted for the

paper type.

Adjust the fuser. For details, see

Adjusting the Fuser

on page 161.

The paper is damp.

Replace the paper.

The high-voltage supply is

defective.

For assistance, go to the Xerox

Support

website at

www.xerox.com/office/WC6027support

Summary of Contents for WorkCentre 6027



































































































































































































































Search results

Summary of Contents for WorkCentre 6027

Reviews:

Related manuals for WorkCentre 6027

Brands by name

Popular brands

Xerox WorkCentre 6027, User Manual

Search results

Summary of Contents for WorkCentre 6027

Reviews:

Related manuals for WorkCentre 6027

Brands by name

Popular brands