Xerox WorkCentre 6027 User Manual Download Page 173

Page: 173 / 226

Maintenance

Xerox

WorkCentre

6027 Multifunction Printer 173

User Guide

Remove the paper from the paper tray.
Keep the paper wrapped and away from humidity and dirt.

Lift and carry the printer as shown in the illustration.

Note:

To find the weight for your printer configuration, see

Physical Specifications

on page 199.

CAUTION:

Failure to repackage the printer properly for shipment can result in damage not covered

by the Xerox

Warranty, Service Agreement, or Total Satisfaction Guarantee. The Xerox

Warranty,

Service Agreement, or Total Satisfaction Guarantee do not cover damage to the printer caused by

improper moving.

When moving the printer, do not tilt it more than 10 degrees to the front, back, left, or right. Tilting the

printer more than 10 degrees can cause toner spillage.

After moving the printer:
1.

Reinstall any parts you removed.

Reconnect the printer to the cables and power cord.

Plug in and turn on the printer.

Summary of Contents for WorkCentre 6027



































































































































































































































Search results

Summary of Contents for WorkCentre 6027

Reviews:

Related manuals for WorkCentre 6027

Brands by name

Popular brands

Xerox WorkCentre 6027, User Manual

Search results

Summary of Contents for WorkCentre 6027

Reviews:

Related manuals for WorkCentre 6027

Brands by name

Popular brands