background image

Page 

2-4

 

Quick Reference Guide 

Options

The following table describes the options available for each of the configurations.

Option

Description

Configuration

Copier

Copier/

Printer

Copier/

Printer/

Scanner

Document Handler 

Feeds single or double sided documents. 
Fitted instead of the Document Cover.

z

z

z

High Capacity Feeder

Holds Paper Trays 3 and 4. Both Trays have a 
larger capacity than Trays 1 and 2, therefore 
reducing the number of times you need to 
replace paper in the machine.

{z

{z

z

Offset Catch Tray

Delivers output either face up or face down, 
collated or uncollated. Each set or stack will be 
offset from the previous to enable easy 
separation. Fitted instead of the Finisher.

{

{

{

Finisher

Delivers output to the Top Tray when no 
finishing option is selected, or to the Stacker to 
collate, stack, staple and hole punch your 
output. In addition a walk-up off-line stapler is 
also available. Fitted instead of the Offset 
Catch Tray.

{

{

{

2 and 3 Hold Punch

Your finisher is delivered with either a 2 Hole or 
a 3 Hole Punch kit, depending on the selection 
made when the Finisher was ordered. The 
Hole Punch kits can also be purchased 
separately to provide more options if required.

{

{

{

Foreign Interface Device

Enables the attachment of a third party access 
and accounting device, such as a card or coin 
operator.

{

{

{

Fax Line 1

Provides a single telephone line connection.

{

{

{

Fax Line 2

Provides a second telephone line. Once 
installed enables your machine to send and 
receive faxes at the same time.

{

{

{

256MB Electronic Pre-
Collation (EPC) memory

Additional temporary storage area for scanned 
information.

{

{

{

Summary of Contents for WORKCENTRE 5050



























































































































































































Reviews: