Xerox WORKCENTRE 5050, Quick Reference Manual

Page: 101 / 186

Quick Reference Guide Page 5-25
Fax
Options:
Add to Send List
Used when you want to send a fax to more than one destination. Enter the number
using the keypad or select the
Phone List button and select a stored number. Then
select the Add to Send List button. Continue to add numbers until all the locations
have been entered.
Send List
Stores the list of telephone numbers entered, to enable faxing to multiple locations.
The number on the
Send List button will change, indicating how many telephone
numbers currently reside in the Send List .
Select the Send List button to view or delete telephone numbers.
Dialing
Characters
Dialing characters are special characters used for entering fax numbers and are
entered as part of the telephone number:
Dial Pause [,]
Allows the machine enough time to switch from an inside line
to an outside line. The delay depends on the fax server.
Long Pause [I]
This pause is used if a longer period is required to gain a dial
tone.
Group Dial [\]
Indicates that an identifier for a previously set up group is
about to be entered.
Mask Data [/]
Used to hide information on printed reports. Characters
entered between two forward slash symbols will appear as
asterisks.
Password Check
Switch [S]
Used for remote terminal identification. This character
verifies that the correct number has been dialed.
Pulse-To-Tone
Switch [:]
Use to switch from Pulse dialing to Tone dialing.
Wait for Network
Tone Detection [W]
Use to suspend dialing until an expected network tone is
detected.
Local ID [+]
Character Check [+]
Required as part of some international telephone numbers (in
place of 00).