Xerox WORKCENTRE 5050, Quick Reference Manual

Page: 74 / 186

Page 4-26 Quick Reference Guide
To use Build Job , split the job into programming and scanning segments. Ensure
Build Job is selected and program and scan the first segment. Continue to program
and load segments until the whole job has been scanned. Select End Build Job
when the entire job has been scanned.
Options:
Off
The feature is switched off.
On
Use to enable the Build Job feature.
Build Job
Controls
Offers options which can be selected when using Build Job .
Build Job Controls options are as follows:
End Build Job
Select this option after the last segment of the job has been
scanned. The job will be sent to print.
Sample Last
Segment
Select to see a proof of the last segment scanned.
Delete Last Segment Use to delete the last segment scanned.
Cancel Sample
Printing
Use to stop and cancel the sample segment that is currently
printing.
Delete All segments
Use to delete the current job and return to the main Build Job
screen.