Xerox WorkCentre 5022 User Manual Download Page 312

Page: 312 / 360

Problem Solving

Xerox

WorkCentre

5022/5024 Multifunction Printer

User Guide

13-38

033-541

The recipient of the specified number is not
registered.

Specify the recipient correctly, or press the
control panel's

Stop

button, and cancel the

job.

033-547

Communication was terminated by a cause
such as pressing the

Stop

button.

The machine will automatically recover.
Press the control panel's

Stop

button, and

try again.

033-548

Cannot transmit manually because a line is
unavailable.

Press the control panel's

Stop

button, and

cancel the job.

033-549

Cannot use the Fax service because of causes
such as memory is insufficient a fax in the
queue.

The machine will automatically recover.
Wait for a while, and try again.

033-550
033-567

Unable to register in the Address Book.

The machine will automatically recover.
Wait for a while, and try again.

033-572

The data received is not printed.

The machine will automatically recover.
Wait for a while, and try again.

033-577
033-578

An error occurred during fax transmission.

The machine will automatically recover.
Wait for a while, and try again.

033-712

Unable to process because of insufficient
memory.

Delete unnecessary data. If the same
message is displayed again, contact our
Customer Support Center.

033-725

The hard disk is full.

The machine will automatically recover.
Wait for a while, and try again.

033-753

An error occurred during fax transmission.

Press the control panel's

Stop

button, and

cancel the job.

034-522

Cannot transmit manually because a line is
unavailable.

Confirm the completion of the job, or press
the control panel's

Stop

button, and cancel

the job.

034-550

An error occurred during fax transmission.

Switch off the machine power, make sure
that the display is blank, and then switch on
the machine power. If the same message is
displayed again, contact our Customer
Support Center.

034-711

An error occurred during fax transmission.

The machine will automatically recover.
Wait for a while, and try again.

034-726

Exceeded the limit of jobs.

The machine will automatically recover.
Wait for a while, and try again.

034-746

The line is not connected correctly.

Press the control panel's

Stop

button, and

cancel the job.

034-752

The recipient`s line is busy.

Press the control panel's

Stop

button, and

cancel the job.

Error Code

Cause

Remedy

Summary of Contents for WorkCentre 5022









































































































































































































































































































































































Search results

Summary of Contents for WorkCentre 5022

Reviews:

Related manuals for WorkCentre 5022

Brands by name

Popular brands

Xerox WorkCentre 5022, User Manual

Search results

Summary of Contents for WorkCentre 5022

Reviews:

Related manuals for WorkCentre 5022

Brands by name

Popular brands