![background image](http://html.mh-extra.com/html/xerox/workcentre-3615/workcentre-3615_user-manual_884210093.webp)
Copying
Xerox
®
WorkCentre
®
3615 Black and White Multifunction Printer
93
User Guide
Document Glass Guidelines
The document glass accommodates original sizes up to 216 x 356 mm (8.5 x 14 in.).
To copy or scan the following types of originals, use the document glass rather than the duplex
automatic document feeder.
•
Paper with paper clips or staples attached
•
Paper with wrinkles, curls, folds, tears, or notches
•
Coated or carbonless paper or items other than paper such as cloth or metal
•
Envelopes
•
Books
Copying an ID Card
You can copy both sides of an ID card or small document onto one side of paper. Each side is copied
using the same location on the document glass. The printer stores both sides and prints them side by
side on the paper.
To copy an ID card:
1.
At the printer control panel, press the
Services Home
button.
2.
Touch
ID Card Copy
.
3.
For side 1, under the ID Card Copy tab, verify the paper supply, lightness/darkness, sharpness, and
auto suppression background settings. Change the settings as needed.
4.
Lift the document cover.
5.
Place the ID card, or a document smaller than half the selected paper supply size, about 6 mm (.25
in.) from the upper left corner of the document glass.
6.
Press the green
Start
button.
7.
Lift the document cover.
8.
For side 2, turn the document over and position it about 6 mm (.25 in.) from the upper left corner of
the document glass.
9.
Touch
Scan Side 2
.
10.
To exit, press the
Services Home
button.
11.
Remove the ID card from the scanner.