Xerox Phaser EX7750, Configuration Manual

Page: 83 / 220

4
4-23 Network Setup options
N
OTE
:
If you want to use sending functions, you may also need to change the WINS
name server settings specified in the Windows Setup>Service Setup>Network Setup.
However, setting up the WINS name server is outside the scope of this document.
For more information about setting up a WINS name server, contact your network
administrator.
For more information about how to use these features, see the documentation that
accompanies your printer.
N
OTE
:
You can send your print job to a Windows server only if you use “Sending
Methods.” Select Windows (SMB) for a Windows server from the Protocol drop-down
list on the Send screen.
When you finish making Setup changes, choose Exit Setup from the main Setup
menu. The EX7750 restarts. All changes are saved on restart.
IPX/SPX Setup options
For protocols other than IPX/SPX, the frame type is automatically enabled and does
not require setup, as follows:
To specify the frame types the EX7750 uses for IPX/SPX protocols, choose
IPX/SPX Setup from the Protocol Setup menu. You must choose at least one frame
type to enable IPX/SPX protocols. The EX7750 supports the following frame types
for IPX/SPX:
• For Ethernet—Ethernet 802.2, Ethernet 802.3, Ethernet II, and Ethernet SNAP
With this protocol And these printing services
This frame type is
automatically enabled
AppleTalk PAP (Printer Access Protocol) Ethernet SNAP
TCP/IP with Ethernet LPD (Line Printer Daemon) Ethernet II
Exit Protocol Setup
AppleTalk Setup
TCP/IP Setup
IPX/SPX Setup
Protocol Setup