Xerox Phaser EX7750, Configuration Manual, Page: 153 / 220

5
5-35 Network Setup
SNMP Setup
The following options can be accessed only in local Setup.
Enable SNMP
—Select to enable the SNMP communication over a TCP/IP or IPX
connection. Leaving this option unselected disables any access to remote Setup
through Command WorkStation.
Read Community
—Change the SNMP Community Name (“public” by default) for
read access. Once it is changed, the new community name must be entered to read any
information through remote Setup. Up to 32 ASCII characters including spaces can be
used for the community name.
Write Community
—Change the SNMP Community Name (“public” by default) for
write access. Once it is changed, the new community name must be entered to read
any information through remote Setup. Up to 32 ASCII characters including spaces
can be used for the community name.
N
OTE
:
For the two options above, a space at the beginning or end of the name is
automatically deleted from the name entered. When an invalid character is entered or
no name is specified, the default “public” is used for the community name. A name
consisting only of spaces is invalid.