Xerox Phaser EX7750, Configuration Manual

Page: 177 / 220

7
7-3 Setting passwords
Passwords from the Control Panel
From the Control Panel, you can set or change only the Administrator password. For
more information about Administrator access privileges, see
page 3-3 . For information
about controlling print jobs with the job management tools, see the Job Management
Guide .
N
OTE
:
The Operator password can be set and changed only from local Setup or
remote Setup.
T
O CHANGE THE
EX7750 A
DMINISTRATOR PASSWORD FROM THE
C
ONTROL
P
ANEL
1. Scroll through the main Setup menu and choose Change Password.
2. Enter and confirm the password, as described below.
New Password
Use the up and down arrow buttons to select the characters and the left and right
arrow buttons to move between them. Enter characters from left to right, since the left
arrow button is also a Delete key. The password can be any combination of letters and
numbers up to 19 characters. Choose OK when you are done. Be sure to keep track of
the password.
N
OTE
:
The only way to remove a password that you cannot remember is to reinstall the
system software.
Verify New Password
Reenter the new password, exactly as you entered it initially. If you make a mistake,
you are prompted to enter the password again. The new password is effective after you
save changes and restart the EX7750.