Xerox Phaser EX7750, Configuration Manual, Page: 59 / 220

3
3-13 About Setup
8. Run the program as instructed.
The program scans the C:, D:, and E: drives mapped.
For details, see the anti-virus software documentation.
9. Enable the appropriate print connections in Server Setup and Printer Setup.
N
OTE
:
When no jobs are processing or printing, scanning is complete within 10
minutes. When jobs are processing or printing and the EX7750 hard disk has limited
free disk space available, scanning takes considerably longer.
About the EX7750 default password
The EX7750 is set with the Windows XP default password “Fiery.1” for
security reasons. This is in compliance with security policies stipulated by Microsoft
Corporation. To ensure network security in your environment, the administrator must
set a password.
Changing the EX7750 system password
If you have the FACI installed, you can change the EX7750 Administrator password in
the same way you set the password for a Windows
XP workstation.
N
OTE
:
If you leave the password blank or specify a password that is too short, you are
prompted to set a new one.
T
O CHANGE THE
EX7750
DEFAULT PASSWORD
FROM WINDOWS
2000/XP
COMPUTERS
1. Press Ctrl+Alt+Delete on the Windows keyboard.
The Windows Security dialog box appears.
N
OTE
:
If you are using the Welcome screen on Windows XP, the Windows Task
Manager dialog box appears. To access the Windows Security dialog box, you must
disable the Welcome screen.
Follow the procedure, “To disable the Welcome screen on Windows XP” on page 3-14,
and proceed to step 2.