Xerox Phaser EX7750, Configuration Manual

Page: 55 / 220

3
3-9 About Setup
The first time you perform Setup, you must use the EX7750 Control Panel.
Configure, at a minimum, Server Setup, Network Setup, and Printer Setup, in that
sequence. After the initial Setup, you can change Setup options from the Control Panel
(see
“EX7750 Control Panel” on page 4-3) or Command WorkStation (see “Accessing
Setup” on page 5-1). Most Setup options can be set using any of these methods.
If you do not configure the remaining Setups, the EX7750 uses default settings. You
need to make settings appropriate for the printing environment at your site.
Local Setup from the EX7750
You can also perform Setup locally at the EX7750, using Setup Fiery from the FieryBar
menu. Some of the settings you specify in Setup configure the Server process (such as
print job defaults), while some configure the Windows XP Workstation environment
(such as system date and time). Depending on the settings you change in Setup, you
must restart the Server software (by choosing Restart Fiery from the FieryBar menu) or
Windows XP before your changes take effect.
Setup options for local Setup are divided into three groups:
General Setup System settings, passwords, and Job Log options
Network Setup All the active network system settings that will transmit print
jobs to the EX7750 and available services
Printer Setup EX7750 print connections to be made available to users, and
PostScript, PCL, and color defaults for jobs