Scanning to a Shared Folder on Your Computer - Network
Phaser® 6128MFP Multifunction Printer
80
Scanning to a Shared Folder on Your
Computer - Network
Setting Up Scanning to a Computer
Before using the printer as a scanner on a network, you must do the following:
1. Create a shared folder on the computer.
2. Create a new address in CentreWare IS or the Address Book Editor pointing the scanner
to the computer.
Note:
For more information, see the
Installation and Setup Overview
on page 26.
Scanning to a Computer on a Network
If you haven’t created a shared folder and an address for the printer to use, see
Setting Up
Scanning to a Computer
on page 80.
To scan to a computer on a network:
1. On the printer control panel, click the
Scan
button.
2. Select
Computer (Network)
, and then press the
OK
button.
3. Select
Scan to
, and then press the
OK
button.
4. Press the
Up Arrow
or
Down Arrow
button to select the address that points to your
computer, and then press the
OK
button.
5. If you want to change any other scan settings, press the
Up Arrow
or
Down Arrow
button to select the setting and make your changes.
6. Press the
Start
button.
The printer begins scanning your documents to the shared folder on your computer.
See also:
Adjusting Scanning Options
on page 85
