Adjusting Copying Options
Phaser® 6128MFP Multifunction Printer
73
3. Select one of the following options:
•
Use the
Up Arrow
or
Down Arrow
to select a preset image size, and then press the
OK
button.
•
Press the
Back Arrow
button, and then use the
Back Arrow
or
Forward Arrow
buttons to set the copy size, and then press the
OK
button.
Note:
The setting default is 100%.
Making the Image Lighter or Darker
To lighten or darken an image when it is copied:
1. On the printer control panel, press the
Copy
button.
2. Select
Lighten/Darken
, and then press the
OK
button.
3. Press the
Back Arrow
or
Forward Arrow
button to lighten or darken the image, and
then press the
OK
button to confirm the setting.
Adjusting the Sharpness
To adjust the sharpness of the copied image:
1. On the printer control panel, press the
Copy
button.
2. Select
Sharpness
, and then press the
OK
button.
3. Select the sharpness setting (Sharper, Normal, or Softer), and then press the
OK
button.
Adjusting the Color Saturation
To deepen or lighten the overall color levels of your copies:
1. On the printer control panel, press the
Copy
button.
2. Select
Color Saturation
, and then press the
OK
button.
3. Press the
Up Arrow
or
Down Arrow
button to select the level of color saturation.
Note:
The setting default is
Normal
.
4. Press the
OK
button to confirm the setting.
See also:
Adjusting Color Balance
on page 74
Setting
Description
Higher
Increases the color saturation to deepen the color of the copy.
Normal
When set to Normal, the color saturation is the same as the original.
Lower
Decreases the color saturation to lighten the color of the copy.
