Print After Checking Printing Result - Proof Print
Phaser® 6128MFP Multifunction Printer
66
Print After Checking Printing Result - Proof Print
The Proof Print feature is enabled by default.
Note:
The data stored in the RAM is erased when the printer is switched off.
About Proof Print
Proof Print is a feature that allows you to store the print data of multiple copies in the
memory, print out only the first set to check the print result and if satisfactory, print the
remaining copies from the control panel.
Proof print data that has become redundant can be deleted using the control panel. See
Proof Printing from the Printer Control Panel
on page 67.
To delete all proof print data that has become redundant, see
System Setup
on page 118.
Configuring Proof Print
The procedure to configure Proof Print using the PCL print driver is as follows:
First of all, carry out the proof print settings at the computer and send data to the printer for
printing. Then, carry out the output procedure at the printer to output the printed pages.
Proof Printing from the Computer
This section explains the procedure using WordPad on Windows XP as an example.
The way to display the printer
Properties
dialog box differs according to the application
software. Refer to the manual of your application software.
1. In the
Job Type
field, select
Proof Print
.
2. Click the
Setup
button.
3. In the
Username
field, enter your user name.
4. If you want to use a specified document name to access the document from the
control panel:
a. In the
Retrieve Document Name
field, select
Enter Document Name
.
b. In the
Document Name
field, enter the name that will appear on the control panel.
5. If you want the printer to automatically name the document using a time stamp, in
the
Retrieve Document Name
field, select
Auto Retrieve
.
