Adjusting Copying Options
Phaser® 6128MFP Multifunction Printer
76
Setting the Margins for a Single Job
1. Place the document to be copied on the document glass.
2. On the printer control panel, press the
Copy
button.
3. Select the margin that you would like to change, and then press the
OK
button.
•
Margin Top/Bottom
•
Margin Left/Right
•
Margin Middle
4. Use the
Up Arrow
or
Down Arrow
button to adjust the margin, and then press the
OK
button.
5. Repeat the steps for other margins, and then press the
Exit
button.
6. Press the
Start
button to begin copying.
Output Adjustments
You can change the following output adjustment settings:
•
Collating Copies
on page 76
Collating Copies
When you make several copies of a multi-page document, you can collate the output. For
example, if you are making three single-sided copies of a six-page document, the copies
are printed in this order when you select collated:
1, 2, 3, 4, 5, 6, 1, 2, 3, 4, 5, 6, 1, 2, 3, 4, 5, 6
If you select uncollated (default), the copies are printed in this order:
1, 1, 1, 2, 2, 2, 3, 3, 3, 4, 4, 4, 5, 5, 5, 6, 6, 6
To select a collating option:
1. On the printer control panel, press the
Copy
button.
2. Select
Collated
, and then press the
OK
button.
3. Select
Off
,
On
, or
Auto
, and then press the
OK
button.
Note:
The setting default is
Auto
, meaning the ADF collation is turned on.
