Basic Copying
Phaser® 6128MFP Multifunction Printer
70
Basic Copying
Use either the document glass or the document feeder to make copies. Load the originals
to be copied and follow the steps below to make copies. To clear the settings from the
previous job, press the
Clear All
button once.
1. On the printer control panel, press the
Copy
button.
2. Enter the desired number of copies using the printer control panel keypad. The number
of copies appears on the upper, right corner of the display. To reset the number of
copies to 1, press the
Clear All
button.
3. Set copying options. See
Adjusting Copying Options
on page 71.
4. Press the green
Start
button.
If you placed originals in the document feeder, copying continues until the document
feeder is empty.
Note:
Print jobs are interrupted when users make copies. Printing continues while the
printer scans the originals. When the copies are ready to print, the print job pauses, the
copies print, and then the print job resumes. Copying cannot be performed while printing a
received fax.
Note:
One set of copies will print if the green
Start
button is pressed.
Document Glass
Lift the document feeder or the document glass
cover, and then place the original facedown on
the back, left corner of the document glass.
Document Feeder
Insert originals faceup with the top of the page
entering the feeder first. Adjust the paper guides so
they fit against the originals.
6128mfp-055
6128mfp-126
