Quick Network Install Guide
9
23.
If your print job did not print, see the Troubleshooting section for
your operating system in the
Advanced Features and
Troubleshooting Manual
to correct the problem.
Note
Printers connected to a Windows NT network with the
TCP/IP protocol enabled, can use a web browser to monitor
and configure your printer. Refer to the section in this
document entitled
Internet Printer Services
.
Note
For installing or managing multiple printers on a Windows
NT network with the TCP/IP protocol enabled, you can use
the Xerox CentreWare MC snap-in to Microsoft Management
Console. Refer to the
Xerox CentreWare MC User Guide
.
Quick install steps (Xerox TCP/IP Port Monitor)
1.
Insert your printer’s CD-ROM into your computer’s CD-ROM
drive. A CD Navigator Utility should automatically start. If it does
not start, then:
a.
Click
Start
and
Run
.
b.
In the Run window, type:
<CD drive>:\SETUP32.EXE
.
2.
Select your desired language from the available list.
Printer driver installation
1.
Install the printer drivers for your printer. Within CD Navigator,
select
Printer Drivers
, and then select
Install Xerox Phaser 5400
Laser Printer Drivers
.
Note
The Xerox TCP/IP Port Monitor has not been installed yet. It
is necessary to temporarily install the printer drivers to an
alternate port. A local port, such as LPT1, is recommended.
