10
Xerox Phaser 5400 Laser Printer
2.
Run the TCP/IP Port Monitor Setup program located on your
printer’s CD-ROM:
a.
Click
Start
and
Run
.
b.
In the Run window, type:
<CD drive>:\instal\utility\Tcp Ip
Port Monitor\Windows NT4\<language>\setup.exe
.
3.
On the first dialog box, select
Install/Upgrade Port Monitor
and
click
OK
.
Port monitor installation
1.
The installation process automatically copies the files to the
system directory. When this process has been completed, a dialog
box appears that reads:
The Xerox TCP/IP Port Monitor was
successfully installed. To add or remove ports, select the ports
tab in your printer properties.
2.
Click
OK
.
Adding a port
1.
To add a TCP/IP port, open the
Printer Properties
dialog box for
the printer you would like to attach the new TCP/IP port.
a.
Click
Start
, scroll to
Settings
, and click
Printers
.
b.
Click your right-mouse button on the printer to which you
want to attach the new TCP/IP port, and select
Properties
.
2.
Select the
Ports
tab, and click the
Add Ports
button.
3.
From the list of available printer port monitors, select the
Xerox
TCP/IP Port
, and then click the
New Port
button.
4.
At this point, you enter the
Xerox TCP/IP Printer Port Wizard
.
The wizard guides you step-by-step through the process of:
a.
Choosing a name for the new port.
b.
Identifying a printer by its DNS Name or IP Address.
c.
(Alternatively) Identifying a printer using the automatic
Printer Discovery
feature.
Click
Next
to proceed with the port installation.
5.
The wizard verifies the port name and printer address, and
automatically configures the remaining port settings for you. Any
errors detected in printer identification displays a dialog box
requesting
Additional Information
.
