Quick Network Install Guide
21
Novell NetWare 3.1x, 4.1x, 5.x Networks
Note
If you use NetWare 4.x or 5.x and print using NDPS/NEPS,
Xerox provides a Xerox NDPS/NEPS solution. This is
available from the Xerox web site at:
http://www.xerox.com/officeprinting
Quick setup
1.
Print the Configuration Sheet. Details are in this document in
Appendix A: Print the Configuration Sheet
.
2.
Check the Configuration Sheet and verify that
Novell enable=On
and
correct Frame Type
is set.
3.
Install print drivers from your printer’s CD-ROM and then install
CentreWare DP from the
Printer Management Software
CD-ROM
on a Windows-based workstation. Details for this are found in the
Instruction Booklet included with each CD-ROM.
4.
Run the CentreWare DP application and choose
Setup Wizard
from the
Printer
menu. NetWare 3.1x users should select the
bindery server install and follow the Setup Wizard steps. NetWare
4.1x users should select the NDS install and follow the Setup
Wizard steps.
5.
Send a print job to the printer.
6.
Check the print job for print-quality. If print-quality problems
exist, use the print-quality section of your printer’s
Advanced
Features and Troubleshooting Manual
to correct the problem.
7.
If your print job did not print, see the Troubleshooting section for
your operating system in the
Advanced Features and
Troubleshooting Manual
to correct the problem.
8.
If you want your printer to service more than one queue, proceed
to the next section entitled
Advanced Setup
.
