4
Xerox Phaser 5400 Laser Printer
Windows 95/98/Me Network
Quick install steps
1.
Insert your printer’s CD-ROM into your computer’s CD-ROM
drive. If your PC is set to autorun, a CD Navigator Utility should
automatically start. If it does not start, then:
a.
Click
Start
and
Run
.
b.
In the Run window, type:
<CD drive>:\SETUP32.EXE
.
2.
Select your desired language from the available list.
Printer driver installation
1.
Install the printer drivers for your printer. Within CD Navigator,
select
Printer Drivers
, and then select
Install Xerox Phaser 5400
Laser Printer Drivers
.
Note
The Xerox TCP/IP Port Monitor has not been installed yet. It
is necessary to temporarily install the printer drivers to an
alternate port. A local port, such as LPT1, is recommended.
2.
Run the TCP/IP Port Monitor Setup program located on your
printer’s CD-ROM:
a.
Click
Start
and
Run
.
b.
In the Run window, type:
<CD drive>:\instal\utility\Tcp Ip
Port Monitor\Windows 9x\<language>\setup.exe
.
3.
On the first dialog box, select
Install/Upgrade Port Monitor
and
click
OK
.
Port monitor installation
1.
The installation process automatically copies the files to the
system directory. When this process is completed, a dialog box
appears that reads:
The Xerox TCP/IP Port Monitor was
successfully installed. To add or remove ports, select the ports
tab in your printer properties.
2.
Click
OK
.
