12
Xerox Phaser 5400 Laser Printer
10.
Choose your printer device from the list, then click
OK
.
11.
Click
OK
. The Wizard returns you to the previous dialog. Verify
that the port name you entered is in the list and is correct. The
check box to the left of the port name must be checked; if it is not,
check it, and then select
Next>
.
12.
Insert your printer’s CD-ROM into your computer’s CD-ROM
drive and click
Have Disk
.
13.
Click the
Browse
button and select the directory containing the
Windows NT drivers:
<CD Drive>:\instal\winnt40
, and then
click
Open
.
14.
Select the
*.INF
file, then click
OK
.
15.
The Wizard returns you to the previous dialog. Verify that the
path and file name are correct and click
OK
.
16.
At the next dialog, enter a name for the printer and select whether
you want that printer to be the default, and then click
Next>
.
17.
If the printer is not shared, click
Next>
. To share the printer, enter
a
Share Name
, check the share checkbox, and then click
Next>
.
18.
At the next dialog it is recommended that you print a Test Print.
Click
Finish
.
19.
Wait for the Test Print to print. A new dialog asks for
confirmation of the Test Print; click
Yes
.
20.
Send a print job to the printer.
21.
Check the print job for print-quality. If print-quality problems
exist, use the print-quality section of your printer’s
Advanced
Features and Troubleshooting Manual
to correct the problem.
22.
If your print job did not print, see the Troubleshooting section for
your operating system in the
Advanced Features and
Troubleshooting Manual
to correct the problem.
