5/2011
6-24
Phaser 4600/4620 Printer Service Manual
GP 19, GP 20
Revision - Xerox Internal Use Only
General Procedures/Information
GP 19 Restriction of Hazardous Substances (RoHS)
Purpose
To give information on the RoHS Directive.
The RoHS Directive restricts the use of certain hazardous substances in electrical and elec-
tronic equipment. It applies to equipment placed in the European Union (EU) market. The
directive takes effect from 1st July 2006.
NOTE: Currently these restrictions are only for the European Union (EU) market and some
associated countries. For more information go to www.Xerox.com.
The hazardous substances are:
•
Lead (Pb)
•
Mercury (Hg)
•
Cadmium (Cd)
•
Hexavalent Chromium (Cr 6+, Cr [VI])
•
Polybrominated Diphenyl Ethers (PBDE’s)
•
Polybrominated Biphenyls (PBB’s)
Identification of a RoHS Compliant Machine
Xerox will maintain a central list of RoHS compliant machines. This general procedure is for
information only. All Phaser machines are RoHS compliant.
GP 20 First Print Output Time
Purpose
First Print Output Time (FPOT) is defined as the time from when the engine receives a Start
signal in Ready state, until a single page is printed and delivered to the output tray.
From Ready State
From Sleep State
First Print Out Time includes the time required to print any maintenance pages (such as the
configuration page) and a single customer page on A size media from Tray 2.
Table 1 Ready State
Resolution
FPOT
600 x 600
7.8 sec.
Table 2 Sleep State
Starting State
FPOT
Sleep
50 sec.
