Xerox Phaser 4500, Service Manual

Page: 111 / 537

3-32 Phaser 4500 Service Manual
Jam At Tray N
Paper arrives early at the Registration Sensor
Error Codes
E2-01: Feed Jam at Tray 1
E2-02: Feed Jam at Tray 2
E2-03: Feed Jam at Tray 3
E2-04: Feed Jam at Tray 4
Troubleshooting Reference
Applicable Parts Wiring and Plug/Jack Map References
■
150-Sheet Feeder Assembly
■
150-Sheet Paper Cassette
■
Registration Sensor
■
Registration Actuator
(Actuator B)
■
LVPS
■
HVPS/Engine Logic Board
■
Registration Clutch
■
Feeder 1 Chute Assembly
■
Gear Assembly Housing
■
No Paper Sensor
■
Feeder 2 Chute Assembly
■
Bottom Plate Assembly
■
Retard Roller
■
Feed Clutch Assembly
■
Turn Roller
■
Turn Roller Clutch
■
550-Sheet Feeder Assembly
■
550-Sheet Paper Cassette
■
“150-Sheet Feeder, 550-Sheet Feeder, Main Fan”
on page 10-22
■
“24 V Interlock, Rear Cover Switch, Main Motor, Sub
Fan, Exit Motor Assembly” on page 10-18
■
“Print Engine General Wiring Diagram” on
page 10-17
■
“Print Engine Plug/Jack Locator” on page 10-3
Troubleshooting Procedure
Steps Actions and Questions Yes No
1 Remove all jammed paper from the tray?
Does the error still occur? Go to step 2. Go to “No Paper in
Tray 1/No Paper in
Tray 2” on
page 3-61.
2
Check the condition of the paper in the tray.
Is the paper crumpled, damaged, damp,
or out of specification? Replace the
paper.
Go to step 3.