Macintosh
Phaser™ 4500 Laser Printer
3-35
Mac OS X, Versions 10.1 and 10.2
Perform these steps
only
for Mac OS X, versions 10.1 and 10.2:
1.
Open the
Network Utility
, then click the
Ping
tab.
2.
Enter your printer’s IP address.
3.
Click
Ping
. If you do
not
get a response, confirm that your TCP/IP settings are correct for
both your printer and computer.
4.
For
AppleTalk
, follow the steps below. For
TCP/IP
proceed to Step 5.
a.
From the printer’s front panel, verify that
EtherTalk
is enabled. If it is not, enable it in
the front panel, then reset the printer.
b.
Print the “Configuration Page” and verify that
EtherTalk
is enabled.
c.
From the “Configuration Page”, verify the
Zone
. If you have multiple zones on your
network, verify that your printer appears in the desired zone.
5.
If you are still unable to print, go to
www.xerox.com/office/support
or access
PhaserSMART Technical Support through CentreWare Internet Services:
a.
Launch your web browser.
b.
Enter your printer's IP address in the browser’s
Address
field (http://
xxx.xxx.xxx.xxx).
c.
Select
Support
.
d.
Click the
PhaserSMART Diagnostic Tool
link to access PhaserSMART.
