Phaser™ 4500 Laser Printer
Copyright © 2004 Xerox Corporation. All Rights Reserved.
3-25
Windows 98 and Windows Me
This topic includes:
■
"Preliminary Steps" on page 3-25
■
"Quick CD-ROM Install Steps" on page 3-26
■
"Other Methods of Installation" on page 3-26
■
"Windows 98 and Windows Me Troubleshooting" on page 3-28
Preliminary Steps
1.
Verify that the printer is plugged in, turned on, and connected to an active network.
2.
Verify that the printer is receiving network traffic by monitoring the LED’s on the back of
the printer or on the CentreDirect External Print Server. When the printer is connected to a
functioning network and receiving traffic, its link LED is green, and its amber traffic LED
is flashing rapidly.
3.
Print a “Configuration Page” and verify that the desired protocol is enabled, then follow
one of these options:
■
Proceed to Step 4 if you do not have a TCP/IP address configured for your printer.
■
Proceed to Step 5 if you do have a TCP/IP address configured for your printer.
4.
Do one of the following if you
do not
have a TCP/IP address configured for your system:
■
Contact your system administrator to ensure that configuration is made according to
your company guidelines.
■
Configure your PC with a unique address such as 192.1.1.1.
5.
If you have a TCP/IP address, then follow these steps to verify the IP address for your PC:
a.
Click
Start
, then click
Run
.
b.
Enter
winipcfg
in the
Open
field. (If the file is not found, TCP/IP may not be
installed.)
c.
Click
OK
.
d.
Select your network adapter from the list. The IP address is listed in the IP Address
field.
Note
For more information about installing and configuring TCP/IP in Windows
environments, go to your Microsoft Windows documentation.
6.
Proceed to “Quick CD-ROM Install Steps” or “Other Methods of Installation” for the
installation method desired.
