Connections and IP Address
Phaser™ 4500 Laser Printer
3-4
3.
Select the
IP Address
tab, then click
Specify an IP address
.
4.
Enter an IP address and Subnet mask, then click
OK
.
5.
If prompted, click
OK
to restart Windows.
Macintosh OS 9.x TCP/IP
1.
Click the
Apple
icon, then select the
Controls Panel
folder.
2.
Double-click
TCP/IP
, then verify that Ethernet is the connection type.
3.
Enter an IP address and Subnet mask, then click
OK
.
4.
If prompted, click
OK
to restart.
Macintosh OS X (10.1 and higher) TCP/IP
1.
Click the
Apple
icon, click
System Preferences
, then click the
Network
icon.
2.
In the
Network
control panel, click the
TCP/IP
tab.
3.
Under
Location
, click
Automatic
.
4.
Under
Show
, click
Built-in Ethernet
.
5.
Under
Configure
, click
Manually
.
6.
Enter the IP Address, Subnet Mask, and Router (Gateway).
7.
Click
Apply Now
to activate the changes.
USB Connection
The USB connection requires a standard USB cable. This cable is not included with your
printer and must be purchased separately. Verify that you are using the correct USB cable for
your connection.
Windows 98 or Later and Windows 2000 or Later
Connect the USB cable to the PC and follow the
Add New Hardware Wizard
to create the
USB port. Follow the
Add Printer Wizard
to install the printer driver from the
Printer
Installer and Utilities CD-ROM
. For more information go to
www.xerox.com/office/
infoSMART
to view these documents:
■
Windows 98: Document # 18215
■
Windows 2000: Document # 22701
■
Windows XP: Document # 53543
Macintosh OS 9.x
A USB-connected printer does not display in the Chooser. Install the printer driver from the
Printer Installer and Utilities CD-ROM
. Use the
Desktop Printer Utility
(version 1.2 or later)
to create a desktop USB printer. The utility is located in the
PhaserTools
folder which is
created during the software installation. For more information go to
www.xerox.com/office/
infoSMART
to view Document # 33225.
