Novell NetWare
Phaser™ 4500 Laser Printer
3-40
Novell NetWare Software Step-By-Step
1.
Verify that CentreWare DP and a Phaser printer driver have been loaded on the
workstation.
2.
Click
Start,
click
Settings,
then
click
Printers
to
verify that the printer is installed.
Launching CentreWare DP
1.
Click
Start
, click
Programs,
then click
CentreWare DP
.
2.
Select the desired printer. If a communications error message appears, your printer is not
able to communicate with your workstation. Verify your printer’s settings, then return to
this document.
3.
With the printer selected, click the
Printer
drop-down list, then select
Advanced Setup
.
4.
Select one of the following connection methods:
■
Novell Directory Services
■
Bindery
5.
Verify that the information displayed is also contained on the “Configuration Page”.
Verify these items:
a.
The queue name of the Phaser printer is set to
service
. If necessary, create a new
queue to test the printer.
b.
The
Primary Server
lists the server name on the “Configuration Page”
Printing a Document
1.
Click the
Tools
drop-down list.
2.
Select the
Send File...
menu item, then select the appropriate directory and file for
downloading. Verify that this is a valid file with no errors.
3.
Click
OK
. The file is sent to the printer. If the document does not print, review the Novell
Menu settings on the “Configuration Page”.
Verifying the Network Settings
1.
At the CentreWare DP main screen, click the
Printer
drop-down list, click
Properties,
then
click
Connections
.
2.
Click the
Network Card
tab. A new dialog box displays information about frame type
and connectors.
3.
Verify that the printer is enabled and the connector and frame type are correct. If changes
are made, reset the printer from the front panel.
4.
Re-print a test page. If the test print does not print, go to
www.xerox.com/office/support
.