Xerox Legacy 4112, User Manual

Page: 8 / 140

X e r o x 4 11 2 / 4 1 2 7 P o s t S c r i p t U s e r G u i d e 1 - 2
1 . B e f o r e u s i n g t h e m a c h i n e
Conventions
This section describes the conventions used throughout this
guide.
Symbols
CAUTION: This symbol alerts you to an action that may cause
damage to hardware, software, or result in the loss of data.
WARNING: Warnings mark alert users to areas of the machine
where there is a possibility of personal injury.
WARNING: This symbol identifies an area on the machine that is
HOT and should not be touched.
WARNING: This symbol indicates a laser is being used in the
machine and alerts you to refer to the appropriate safety
information.
KEY POINT: This symbol identifies information that is being
emphasized and is important for you to remember.
The 1 2 3... symbol indicates the beginning of a task or work
process you should use to complete a procedure and is followed
by the first step of a numbered procedure, task, or work process.
NOTE: This symbol calls your attention to information that is
helpful, but not essential to complete a procedure or task.
This symbol indicates that there is additional information from
another source, such as a web site or manual.