Xerox Legacy 4112, User Manual

Page: 122 / 140

X e r o x 4 11 2 / 4 1 2 7 P o s t S c r i p t U s e r G u i d e 6 - 2
6 . B a r c o d e S e t t i n g s
Font types and character sets
The table below lists compatible barcode types.
For the character set used to specify each barcode character, see
“Character set tables” on page 6-3.
See “Barcode sizes” on page 6-13 for details about the size of
printed barcode.
NOTE: The printed barcode’s readability depends largely on
factors such as the quality of paper used and performance of the
barcode reader. Before using this product, we recommend you
thoroughly test it under the conditions in which it will be used.
Sample program and output results
A program that prints a sample of each type of barcode and a PDF
showing the output results is provided. Use these samples as a
reference when printing barcodes.
• Location of sample program and output results in PDF
Located in the [manual] > [sample] folder on the PostScript
Driver Library CD-ROM
• Sample program name
Sample.ps
• Output results PDF name
Sample.pdf
Barcode type PostScript font name Refer to the following table
JAN HitachiITHINJANH8-RG JAN Character Set Table (page 6-3)
Code 39 HitachiIT-C39H8 Code 39 Character Set Table (page 6-4)
NW7 HitachiITHINNW7H8-RG NW7 Character Set Table (page 6-5)
Code 128 HitachiITHINC128H8-RG Code 128 Character Set Table (page 6-6)
ITF (without bearer
bar) HitachiITHINITFH8-RG
ITF (Interleaved 2 of 5)
Character Set Table (page 6-10)
ITF (with bearer bar) HitachiITHINITFB-RG
Customer Barcode HitachiITHINPOSTBC-RG Customer Barcode Character Set Table (page 6-12)
Font type PostScript font name
OCR B LetterPress M OCRBLetM