Xerox Legacy 4112, User Manual

Page: 37 / 140

X e r o x 4 11 2 / 4 1 2 7 P o s t S c r i p t U s e r G u i d e
2-9
2 . W i n d o w s M e
Feature List
Offset Stacking The position of individual jobs or sets of copies are shifted to either
side of the output tray to enable easy separation.
Collated Selects whether to collate a multiple-page file per set when they
are printed.
Feed Separators from Specifies the paper tray that transparency dividers are to be fed
from. When [Auto] is selected, the tray set on the machine is used
as the feed destination.
Print on Separators Specifies whether or not to print on the transparency dividers as
well as the transparency.
Front Cover Specify whether to add a front cover to the printouts. Select the
paper tray for feeding the front cover sheets.
Back Cover Specify whether to add a back cover to the printouts. Select the
paper tray for feeding the back cover sheets.
Tray 8 - Specify Tab Stock Specifies whether or not to print on the transparency dividers as
well as the transparency.
Stapling Specifies whether or not to staple printed documents and the
position of the staple. You can staple 2 to 50 sheets of 80 g/m
2
or
lighter paper.
NOTE: You cannot use staples in the following situations:
– When anything other than Finisher Tray is selected for
Output Destination in the Advanced tab.
– When Job Offset is selected.
Hole Punching Select the punching position.
The holes are made based on the output orientation of the
paper. As a result, the holes may not be punched correctly
depending on the position of the image.